Matrice 600 Accessories

The A3 can be upgraded to A3 Pro by using two A3 Upgrade Kits. The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic...

The DJI Hex Charger requires the Inspire1 180W Power Adapter AC Cable for charging batteries (power adapter cable sold separately).   The DJI Hex Charger is designed for use with dedicated Intelligent Flight Batteries and Remote...

DJI Matrice 600 - GPS Foldable Mount

35 minutes to charge TB47 Battery with 90% capacity 58 minutes to fully charge. 45 minutes to charge TB48 with 90% capacity, 68 minutes to fully charge. Overview The Rapid Charge Power Adapter is made specifically for DJI Inspire 1. This is...

DJI Lightbridge 2 HD digital video downlink antenna kit is mounted on the landing gear legs.  

The Matrice 600 Battery Travel Case can hold up 2 DJI Hex Chargers and 18 Intelligent Flight Batteries (TB47S / TB48S / TB47D / TB48D). Integrated wheels make the travel case easy to maneuver. Using the reserved spaces, batteries can be charged without...

Matrice 600 - Center Frame Upper Plate

Used to suppport the aircraft, includes carbon tubes, damping balls, and T-shape metal parts.    

Matrice 600 - Rear Light Board Kit

The remote controller integrates video downlink and aircraft control into one system. The combined system operates at 2.4 GHz with a maximum signal transmission range of 5 km. The device features a number of standard and customizable buttons that allow...

What‘s Included With This Combo Matrice 600 - TB47S Intelligent Flight Battery × 6 4500mAh, 22.2V battery that comes with charge and discharge management. New and powerful embedded battery cells provide power to the aircraft...

Used for mounting the Zenmuse Z15 series onto the Matrice 600 for high quality imaging. In the box:Power Connect Cable × 14 PIN Cable × 17 PIN Cable × 1Active Lock × 4Damper × 12Screws

Used for mounting Zenmuse X3 and X5 series cameras onto the Matrice 600 for high quality stable imaging and a flight time of up to 30 minutes. In the box:Lower Expansion Bay Plate × 1Gimbal Bracket × 4Lower Expansion Bay Connector...

The 21-inch propeller is made of Ultra Carbon Pro, an advanced composite material, for lower rotational inertia in combination with high strength and stiffness. Their aerodynamic profile combined with optimized electro-magnetic design of the motor make...

This hood shields your smartphone from direct sunlight to give you a perfectly clear view of your display. Made from high-quality synthetic leather, the hood can hold a phone up to 165mm x 87mm x 85mm in size.   The hood can be installed on...

Compatible with iPad Mini and majority of small-form factor tablet devices. Maximum device size: 205mm*145mm*128mm The Monitor Hood shields your tablets from direct sunlight to give you a perfectly clear view of your display. Collapsible and...

The DJI SRW-60G is a short range wireless video link, which can transmit real time HD video or images for up to 10 meters. Containing both a transmitter and a receiver, it is not only suited for the Ronin-MX and Matrice 600, but can also be used with the...

Note:RTK-G: Using a GPS+GLONASS dual positioning module, RTK-G is suitable for most countries and regions worldwide.RTK-B: Using a GPS+BDS dual positioning module, RTK-B’s positioning performance surpasses RTK-G in areas covered by BDS. RTK-B is...

The Zenmuse X5R SSD is a high performance storage device designed for the Zenmuse X5R. It is essential when shooting video in a lossless format. SpecificationsCapacity: 512 GBDimensions: 84 mm × 38 mm × 6.5 mmWeight: 33 gOperating...

The Zenmuse Z3 gimbal and camera features an optical zoom lens. It provides a 3.5 optical zoom and 2x digital zoom. The Type 1/2.3 CMOS sensor supports 4K video recording and 12MP still photos. As with other DJI 3-axis gimbal systems, the Zenmuse Z3 can...